Proposal Ring Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My first model, so constructive criticism is encouraged
A 2 piece, engagement ring box. Easy to print and setting a filament change script at layer 7 and layer 13 will give a nice accent around the outside of both pieces and make with words on the inside of the lid really POP. 5x2mm magnets are used for the lid and body. You will need 4 of these. I decided to leave the magnets visible and not imbed them to ensure the lid stays closed. A fresh piece of filament is used for the hinge pin, heat up both ends and lightly push inward towards the hinge, one side at a time. I used a high density foam cut to fit within the bottom part with a slit cut in it to hold the ring like a normal ring box. I recommend using the color used for the words as your hinge pin. I think this came out looking really clean and had a lot of fun making this.
Printed in PETG, 0.16mm layer height, 10%infill, 3 perimeters, and 3 top and bottom layers. No supports needed