Parametric Cycle Mirror Handlebar Plug Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Cycle Mirror Handlebar Plug Mount Suitable for mounting mirrors with a 10 mm ball mount system in handlebar…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric Cycle Mirror Handlebar Plug Mount
Suitable for mounting mirrors with a 10 mm ball mount system in handlebar ends (plug-style).
I have a nice Busch und Müller rearview mirror, which came with a plug mount that didn't fit into the equally nice but Busch-und-Müller-incomptabile aluminium handlebar of my bicycle. This parametric design allows the creation of plugs that fit non-standard handlebars.
Thanks to Stamos for the inspiration, though after considerable head-scratching, I ended up with a completely different design! :-)
If you're using a different style of mirror, also check out this customizable design by Ryoko:
https://www.thingiverse.com/thing:280910/
Post-Printing
Parts needed
- 1 Screw M4 x 40 mm (circular head)
- 1 Hex Nut M4
- Superglue (optional, recommended)
- 3 x 5 mm x 1.75 mm filament lengths (optional, recommended)
Assembly
- Optional: Insert 5 mm x 1.75 mm filament lengths into the registering holes
- Optional: Glue "crown" to "plug".
- Insert hex nut into "cone".
- Insert screw into plug assembly.
- Insert cone loosely into plug.
- Screw screw into nut loosely.
- Push plug into handlebar end.
- Tighten screw until plug sits firm.
- Mount mirror to ball.