Parametric Cycle Mirror Handlebar Plug Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric Cycle Mirror Handlebar Plug Mount Suitable for mounting mirrors with a 10 mm ball mount system in handlebar…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 49
- Makes
- 0
- Views
- 540
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric Cycle Mirror Handlebar Plug Mount
Suitable for mounting mirrors with a 10 mm ball mount system in handlebar ends (plug-style).
I have a nice Busch und Müller rearview mirror, which came with a plug mount that didn't fit into the equally nice but Busch-und-Müller-incomptabile aluminium handlebar of my bicycle. This parametric design allows the creation of plugs that fit non-standard handlebars.
Thanks to Stamos for the inspiration, though after considerable head-scratching, I ended up with a completely different design! :-)
If you're using a different style of mirror, also check out this customizable design by Ryoko:
https://www.thingiverse.com/thing:280910/
Post-Printing
Parts needed
- 1 Screw M4 x 40 mm (circular head)
- 1 Hex Nut M4
- Superglue (optional, recommended)
- 3 x 5 mm x 1.75 mm filament lengths (optional, recommended)
Assembly
- Optional: Insert 5 mm x 1.75 mm filament lengths into the registering holes
- Optional: Glue "crown" to "plug".
- Insert hex nut into "cone".
- Insert screw into plug assembly.
- Insert cone loosely into plug.
- Screw screw into nut loosely.
- Push plug into handlebar end.
- Tighten screw until plug sits firm.
- Mount mirror to ball.