Samsung Galaxy A34 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Samsung Galaxy A34 case. You can create your own ornament case in slicer.
- Ocena
- 4,5 / 5
- Polubienia
- 89
- Pobrania
- 1660
- Wydruki
- 11
- Wyświetlenia
- 4619
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Samsung Galaxy A34 case model.
Variants:
There are 3 main variants of this model in the files below:
- blank cover (can be used for custom ornament)
- with honeycomb ornament
- with cam-cut pattern
And each variant is also available with a grip-edge for a better grip when lifting the mobile from the table.
Update 09/2023: Added 3 models with closed corners. Should be better for printing with TPU.
Update 01/2025: Added 3 models without grip-edge and with closed corners.
Use the blank cover to create your own case. Just add your ornament stl to the slicer and set it as negative volume.
Printing:
I used PETG (0.2mm layer), but I hope you can go with TPU as well. Use textured sheet, it looks much better. I didn't use supports, but had to clean up the bridging a bit after printing.
Also check out: