1 / 11
FormD T1 v2 Fan Brackets and 120mm Fan Plates — zdjęcie 1
1 / 11

FormD T1 v2 Fan Brackets and 120mm Fan Plates

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two sets of fan brackets (standard and quiet) to replace the stock ones and 120mm fan plates for airflow optimization.

Ocena
0 / 5
Polubienia
28
Pobrania
243
Wydruki
1
Wyświetlenia
2934
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

The standard set of fan brackets can replace the stock fan bars that come with the FormD T1 v2.  They offer plenty of flexibility with fan positioning and lower the fans by about 1.5mm compared to stock.

The quiet set of fan brackets feature a cutout to remove the portion of the fan brackets that obstruct the fan inlet causing noise and turbulence, reducing the airflow efficiency.  Due to the design, it limits the possible positions of the exhaust fans.  This limited positioning is more than made up for by the noise reduction and improved airflow.

The 120mm fan plates completely section off the upper portion of the case turning it into an exhaust plenum.  This stops the fans from recirculating the same air and force them to only pull from the lower section of the case.  A circular cutout allows the fan cables to pass through and can fit a rubber grommet for extra sealing.  The fan plates are compatible with the standard & quiet fan brackets, as well as the original stock brackets.  

Tagi