1 / 11
FormD T1 v2 Fan Brackets and 120mm Fan Plates — image 1
1 / 11

FormD T1 v2 Fan Brackets and 120mm Fan Plates

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two sets of fan brackets (standard and quiet) to replace the stock ones and 120mm fan plates for airflow optimization.

Rating
0 / 5
Likes
28
Downloads
243
Makes
1
Views
2,934
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

The standard set of fan brackets can replace the stock fan bars that come with the FormD T1 v2.  They offer plenty of flexibility with fan positioning and lower the fans by about 1.5mm compared to stock.

The quiet set of fan brackets feature a cutout to remove the portion of the fan brackets that obstruct the fan inlet causing noise and turbulence, reducing the airflow efficiency.  Due to the design, it limits the possible positions of the exhaust fans.  This limited positioning is more than made up for by the noise reduction and improved airflow.

The 120mm fan plates completely section off the upper portion of the case turning it into an exhaust plenum.  This stops the fans from recirculating the same air and force them to only pull from the lower section of the case.  A circular cutout allows the fan cables to pass through and can fit a rubber grommet for extra sealing.  The fan plates are compatible with the standard & quiet fan brackets, as well as the original stock brackets.  

Tags