Logi C920s Mount for Ikea Bror
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remake I did to mount the Logitech C920s camera to the Ikea Bror post.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello there,
This is my very first share.
I use Ikea bror shelving system to put all of my 3d printers and some other accessories. For my Prusa MK4, I used the Logitech C920 Original Prusa Enclosure Mount from Hoppsen, which is fantastic, but my Minis have no enclosure, so I took the camera mount end design from Hoppsen's to build this mount.
It printed without support using the correct face against the build plate. It worked beautifully for me.
I used Ruthex M4x8.1 threaded inserts together with M4x12mm screws.
I hope you find this humble remix useful.