Pentachoron V1.0 - Delta 3D printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I desided to make some improvements to my delta 3D printer (Kossel mini).
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 1434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I desided to make some improvements to my delta 3D printer (Kossel mini). So I re-designed everything and build a complete new frame using 4020 aluminium extrusion profiles and 10 mm rods, Igus bearings, GT2 belt for the motion. In addition I, designed a magnetic effector using neodym magnets, 10mm ball bearing balls and 6x4mm carbon rods.
The printer on the picture does not have the measurements recommended in this instructable - it's only 750mm high and the arms are a little bit to long - if you order / cut the parts according to the parts list you will get a taller printer.
The footprint is about 420 x 500 x 1000 mm
The print-volume is about 220x600 mm.
You can find all instructions and information in the instructable here:
http://www.instructables.com/id/Pentachoron-Delta-3D-Printer-With-Auto-Bed-Levelin/