Ultra Satsana - DirectDrive, CableChain, Dual 4010 fans and BLTouch compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a DirectDrive&BLTouch compatible Satsana holding two 4010 fans. Also can be attached to a cable chain.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 805
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Deutsch:
Update:
Ich habe das Modell noch einmal überarbeitet, damit es jetzt auch eine Version gibt, die das Montieren eines BLTouch (oder ähnlichem) Sensors ermöglicht. Der Teil für den BLTouch benötigt ebenfalls einige Supports (siehe letztes Bild).
Ich habe kürzlich meinen Voxelab Aquila auf DirectDrive aufgerüstet. Leider hat mein bisheriger Druckkopf nicht mehr gepasst, da der neue X-Achsen Schlitten scheinbar die Bohrungen des Creality Ender 3 hat, weshalb ich mir nun einen neuen entworfen habe.
Beim Druck habe ich einige Supports im Bereich des zweiten Lüfters verwendet (siehe Bilder). Ansonsten druckt er Support-frei.
Der Druckkopf (Lüfterhalter oder wie auch immer man es nennen will) ist zur Nutzung zweier 4010er Lüfter (bsp. Noctua wie bei mir) vorgesehen und ist mit der Umrüstung zum DirectDrive kompatibel. Außerdem hat er Bohrungen zur Montage meines passenden CableChain-Adapters (optional)
Ich habe folgenden Bausatz von Amazon verwendet:
Diese Lüfter habe ich benutzt (andere Modelle der selben Größe sollten aber problemlos passen):
Noctua NF-A4x10 FLX, Leiser Premium-Lüfter, 3-Pin: Amazon.de: Computer & Zubehör
Ich habe dieses Lüftergitter verwendet:
40mm Fan Grille / Cover von IAmDotorg | Kostenloses STL-Modell herunterladen | Printables.com
Hier noch ein alternatives Lüftergitter Design im Hex-Look:
English:
Update: I remodeled this one, so that it is now possible to mount a BLTouch (or similar) Probe. The Probe-Part also needs some supports (look at the last picture).
I recently upgraded my Voxelab Aquila to DirectDrive. Unfortunately, my previous fan shroud no longer fit because the new X-axis carriage apparently has the same holes as the Creality Ender 3, so I designed a new one. During the print, I used some supports around the second fan (see pictures). Otherwise, it prints without supports.
The fan shroud is designed to use two 4010 fans (like Noctua as in my case) and is compatible with the DirectDrive upgrade. Furthermore it has holes to attach my fitting cablechain mount (optional).
I used the following kit from Amazon:
I used these fans (other ones with the same size should work as well):
Noctua NF-A4x10 FLX, Leiser Premium-Lüfter, 3-Pin: Amazon.de: Computer & Zubehör
I combined it with this fan cover:
40mm Fan Grille / Cover von IAmDotorg | Kostenloses STL-Modell herunterladen | Printables.com
Here an alternative fan cover design in hex-style: