IKEA Kura ladder passive light brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
these two brackets can be quickly attached to the Bed and are intended to make the rungs of the ladder visible at night
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 105
- Wydruki
- 4
- Wyświetlenia
- 1205
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
I printed the brackets with glow in the dark PLA filament so my daughter can see the ladder steps better at night.
Each of the brackets is pushed onto the ladder rung from the front and rear and screwed on with two screws.
One of the brackets has two M3 threads already pre-modeled, so just test briefly after printing whether it fits and, if necessary, cut it with an M3 thread cutter.
You need two M3x25 hex screws per bracket.
I also have another project for the open long holes on the bed: https://www.printables.com/de/model/508039-ikea-kura-long-hole-plugs
happy printing and please post a make, i would really appreciate it :)