IKEA Kura ladder passive light brackets
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.69 – €2.07 net (excluding VAT)
For file: Ikea_Kura_ladder_passive_lights_Set_0.2mm_PLA_MK3S_2h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.88 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 2.15 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
these two brackets can be quickly attached to the Bed and are intended to make the rungs of the ladder visible at night
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 105
- Makes
- 4
- Views
- 1,205
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
I printed the brackets with glow in the dark PLA filament so my daughter can see the ladder steps better at night.
Each of the brackets is pushed onto the ladder rung from the front and rear and screwed on with two screws.
One of the brackets has two M3 threads already pre-modeled, so just test briefly after printing whether it fits and, if necessary, cut it with an M3 thread cutter.
You need two M3x25 hex screws per bracket.
I also have another project for the open long holes on the bed: https://www.printables.com/de/model/508039-ikea-kura-long-hole-plugs
happy printing and please post a make, i would really appreciate it :)