Original Prusa MINI/+ Filled Axis Motor Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod is designed to stop dust and other debris getting into the axis motors on your Prusa MINI/+.
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 68
- Wydruki
- 2
- Wyświetlenia
- 384
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Filled Axis Motor Cover
Remixed from David Warboss' Prusa Mini Base
This mod is designed to stop dust and other debris getting into the axis motors on your Prusa MINI/+. It should fit all axes (except the Y axis, a version for it is coming soon!).
I recommend you print this in PETG, due to the motors heating up ever so slightly. You could print it in PLA, however, due to the fact that PLA can melt under higher temperatures, it is not recommended by me.
The model on the pictures was printed using these printer settings:
Printer: Original Prusa MINI+
Filament: Prusament PETG Galaxy Black
Profile: Default PrusaSlicer printer profile, with other layers being printed at 230C
Infill: 100%, rectilinear
Layer height and profile: 0,15mm SPEED
Print time: ~1 hour