1 / 4
Prusa MK4 Z-Bottom Motor Hole Dust Caps / Covers — zdjęcie 1
1 / 4

Prusa MK4 Z-Bottom Motor Hole Dust Caps / Covers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Z-Bottom Motor Caps / Covers to prevent filament and other items getting lost in the screw hole.

Ocena
5 / 5
Polubienia
18
Pobrania
93
Wydruki
5
Wyświetlenia
1015
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Worried that filament might find it's way into the Z-Bottom motor mount screw holes? Here's your solution!

I've made a couple versions of the caps and provided bother .STL's.

V2 = looser fit; easier to remove
V3 = tighter/snug fit; not as easy to remove, but won't fall out on it's own

V3 *.gcode included in files; 0.4 nozzle with Input Shaping (IS) enabled! IS requires firmware 5.0.0-alpha4.

If slicing yourself, print cap head down; no supports necessary.

Enjoy!

Tagi