IVAR EN16 Conduit Pipe Filament Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal Filament Storage System for IKEA IVAR shelfing
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This minimal shelfing system uses EN16 PVC conduit pipe to store filament spools in 300 mm deep IKEA IVAR shelfing.
Each shelf uses less than 50 g of Filament and prints in less than an hour. It is recommended to use a small brim for the structural peg only.
The required length of EN16 conduit pipe are
2x 425 mm for the 420 mm wide shelf
2x 835 mm for the 830 mm wide shelf
(but for stability you might want to span multiple units if you have 830 mm wide shelfs )
You will need 2x of the main unit and 4x of each peg (structural peg, locking peg) per shelf. The main peg can be substituted with an original IVAR peg.
It is recommended to add at 2-3 normal shelfs as well as cross-brace in each unit for stability. You might to want to add a drop of glue to the locking pegs and the conduit pipes but it is not required.