Spice Rack / Lightweight shelf made with dowel rods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Back mounted brackets to make a spice rack or lightweight shelf, to be used with 10mm dowel rods.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 758
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
These brackets were designed to make a spice rack with 10mm dowel rods, but because it's about double the width of a normal spice rack it can also be used to make a lightweight storage shelf.
There are three parts to the model - the outer brackets (left and right side) plus a middle bracket to support a longer shelf lenth if desired.
A single shelf needs four 10mm dowel rods of whatever length you require. The dowel rods simply slide into the holes with a fairly loose fit and don't need to be glued into the end brackets unless you want a sturdier shelf.
I printed these in PLA with a 0.4mm nozzle, 0.2mm layer height and 15% infill and they seem pretty strong.
I had some issues with bed adhesion so a brim is recommended.
I hope you find this useful, happy printing :-)