Spice Rack / Lightweight shelf made with dowel rods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Back mounted brackets to make a spice rack or lightweight shelf, to be used with 10mm dowel rods.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 93
- Makes
- 1
- Views
- 758
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
These brackets were designed to make a spice rack with 10mm dowel rods, but because it's about double the width of a normal spice rack it can also be used to make a lightweight storage shelf.
There are three parts to the model - the outer brackets (left and right side) plus a middle bracket to support a longer shelf lenth if desired.
A single shelf needs four 10mm dowel rods of whatever length you require. The dowel rods simply slide into the holes with a fairly loose fit and don't need to be glued into the end brackets unless you want a sturdier shelf.
I printed these in PLA with a 0.4mm nozzle, 0.2mm layer height and 15% infill and they seem pretty strong.
I had some issues with bed adhesion so a brim is recommended.
I hope you find this useful, happy printing :-)