Wall Mounted Bike Wheel Support Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mounted my bikes in the garage by using a HIGH QUALITY double hook through pedal and these Wheel Plates for support
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 171
- Wydruki
- 2
- Wyświetlenia
- 1495
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Mounted my bike on the garage wall using a High Quality Hook through the pedal
( Ones I used - https://www.ebay.co.uk/itm/363733687533 - No affilate, Buy / Use at your own risk ). Ensure hooks suit pedal design.
Designed to support both wheels and spread the load over all 3 points.
Mounting holes elongated for easy adjustment and chamfered to allow standard screw head, Take care not to over tighten
Concave top to help support tyre
Sturdy part to take the loads involved. I used PLA+
Print with wall surface down on the bed and no support is required.
On slicer you could scale on Z axis only to allow for different tyre widths ( my pics show original size ( 60mm ) works fine with MTB and Fatbike.
Printed 0.2mm Layer Height on Normal mode.