Shure to K&M Adapters - 3/8"-16 inner to 5/8"-27 outer thread reducer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple adapter for reducing 5/8"-27 to 3/8"-16 threads. Modeled after Shure part #95A2050 (31A1856).
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 187
- Wydruki
- 0
- Wyświetlenia
- 844
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The industry standard for microphone-stand mounting threads is 5/8"-27. European manufacturers, most notably "K&M König & Meyer", use 3/8"-16 threads however. This makes the american and european equipment incompatible and most american manufacturers, like "Shure", ship with fitting adapters.
The 3D-printed adapters were modeled after the adapter that ships with the Shure SM57/58 microphones.
There are three version of the adapter, one that is 6mm high, which is an exact replica of the orignal, one which is 12- and one which is 18mm tall. They all work in the same manner. I have used the 6mm version for my microphone clip and the 12mm version for a tablet holder.
Printed at 0.1mm layer height with brim and 100% infill.