1 / 2
Shelf Hook for hanging headphones and cables. (18mm) — zdjęcie 1
1 / 2

Shelf Hook for hanging headphones and cables. (18mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fits seamless on to medium-density fiber (MDF) boards/shelves with a thickness of 18mm. Made to attach to wall side.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Shelf Hook for hanging headphones and cables. Fits seamlessly onto medium-density fiber (MDF) boards/shelves with a thickness of 18mm. Made to attach to the back of the board and be sandwiched between the shelf and the wall. This will result in the shelf coming forward about 4mm. Designed to be used in a built-in closet with loose shelves. Can handle a lot of weight for its size, to optimize strength: print laying flat on its side so the layers are oriented to handle the most weight. 

 

Settings

Printed with a 0.4mm nozzle at a layer height of 0.2mm. Printed in PETG, but will work well with PLA. Infill at 80% with cubic subdivision pattern. 

 

Orientation

Lay flat on its side for maximum strength. 

See printing orientation below:

Tagi