Scheppach ASP-30 shopvac to 60mm suction hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The inexpensive Scheppach workshop vacuum comes with a cheap, sad, thin hose.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The inexpensive Scheppach workshop vacuum comes with a cheap, sad, thin hose. To use the vacuum's full capacity, a wider hose can do a lot of good. This adapter allows you to put a serious 60mm hose to use on your Scheppach ASP-30-*.
While we are on it: Another sad detail about the ASP-30 is its dust filtration capability. Check out my cheap dust cyclone project if you want to solve that! :-)
Tip: If the adaptor does not sit totally tight in your vacuum socket, one round of (electrical) insulation tape around its base can work wonders! :-)
Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 15%
Filament: Patona PLA white
Notes:
I strongly recommend to use a brim.
How I Designed This
I designed this part in TinkerCad out of stock parts from the TinkerCad library. If you want to adapt the design to your needs, go ahead and tinker it! :-)</div>