1 / 10
SK-Go MK3S+ Mosquito Fan + BMG-M + BL-Touch + 5015 fan — zdjęcie 1
1 / 10

SK-Go MK3S+ Mosquito Fan + BMG-M + BL-Touch + 5015 fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Used the MK3S+ remixed duct created by WickedTwister to create a mount for SK-Go.

Ocena
0 / 5
Polubienia
4
Pobrania
54
Wydruki
0
Wyświetlenia
863
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Used the MK3S+ remixed duct created by WickedTwister to create a mount for SK-Go.

The fan is at an angle and it does not crash on the left side during sensorless homing.

The cooling is pretty good.

Print instructions

Printed in ASA at 0.15mm layer height.
Supports on build plate only.

For assembly start by mounting the 5015 fan on the fan-shroud-support, then slide the fan shroud on the fan-shroud-support slot.

Install the extruder-plate-mount on the extruder plate. Next install the BL-Touch.

Then install the fan-shroud-mount and the fan-shroud on the extruder plate mount.

Tagi