Shelving system for filament sample alternative tray (Stackable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
easy print that will help keeping the trays together
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 155
- Wydruki
- 4
- Wyświetlenia
- 960
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Shelving system that will fit the alternative tray designed by Bas van der Ploeg to keep filament samples created by @Zahg and @Seemonster
The filament samples were a perfect fit for my needs and the alternative tray was in the same lead, however, I needed to keep the trays together not warring about miss placing them or keep looking for them when needed so I came up with this simple shelve idea following these criteria
- Expandable adding more trays when needed (the Shelves are stackable, they will slide together make them one larger unit)
- Fast printing with minimal materials (originally, I designed this with hexagon opening in all five sides. I also tried it with full sold walls; however, with testing I found out that keeping the 2 sides with the hexagon’s and the other sides fully sold was the fastest approach with some material saved and it was the safest compromise between speed and weight)
- Keep the tray secured so they don’t fall out when the shelve is moved or pushed (I solved this by adding a small lip to the open side of the shelve, now I can flip the shelve upside down and things will stay in place -Unless flipped aggressively-)
Note: I printed the model at the same orientation provided without support
If you’re using the alternative tray version to keep the filament samples then this is a nice addition to keep things neat.
If you like check the Interlocking Base that can be used to join multiple towers together.