Better Spindle and Rail for Woodpecker CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X-Axies and Spindle Improvement for a Woodpecker CNC. aka: CNC3018 CNC2417 (i have this model) CNC1610 I used a MGN15…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
X-Axies and Spindle Improvement for a Woodpecker CNC.
aka:
CNC3018
CNC2417 (i have this model)
CNC1610
I used a MGN15 Profile with a H-Block (longer than a C-Block). For the CNC2417 order a 350mm long one.
The Motor is a "200w engraving machinespindle motor": https://www.aliexpress.com/item/200w-engraving-machinespindle-motor-air-cooling-cnc-spindle-dc-motor-CNC-Engraving-Machine-ER11-3/32799895100.html (D=52mm)
I also use an secondary power supply for the spindle. Contact me If you want those details too.
I do recommend getting additional square Brackets to fasten the Aluminium Profile, mine have not arrived yet. Even though the whole profile is only held with 2 screws I get way better performance and stability out of the machine.
Use the Testpart to confirm your printer tolerances are in range, so the rest will fit.
Pro Tipp: Use a pece of (green) Nylon Filament as a cheap drag chain.
Category: DIY