1 / 9
Front Tensioners for Ratrig V-Core 3.1 - Enclosure 2.0 ONLY
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BETA Version! Front Tensioners for Ratrig V-Core 3.1 with Enclosure 2.0.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (1)Kolekcje (32)Powiązane
Per side you will need:
- 1 x M5 25mm Screw for the Tensioner screw
- 2 x M5 20mm Screws and t-nuts for the Horizontal 3030 profile mounts
- 2 x M6 12mm Screws and t-nuts from the original VCore 3.1 Enclosure 2.0 Front Idler mounts to mount to the Front Z Extrusion
- 2 x M5 Heatset Inserts 8mm heigh for the pulley holder
The idler screws should come from the existing setup, using the exact same sequence of shims, bearings and spacers on each side.
