1 / 9
Front Tensioners for Ratrig V-Core 3.1 - Enclosure 2.0 ONLY
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BETA Version! Front Tensioners for Ratrig V-Core 3.1 with Enclosure 2.0.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 95
- Makes
- 0
- Views
- 760
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
Per side you will need:
- 1 x M5 25mm Screw for the Tensioner screw
- 2 x M5 20mm Screws and t-nuts for the Horizontal 3030 profile mounts
- 2 x M6 12mm Screws and t-nuts from the original VCore 3.1 Enclosure 2.0 Front Idler mounts to mount to the Front Z Extrusion
- 2 x M5 Heatset Inserts 8mm heigh for the pulley holder
The idler screws should come from the existing setup, using the exact same sequence of shims, bearings and spacers on each side.
