Hypercube Volcano ABS fan duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Efficient 5015 fan duct with free air flow.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I got tired of the previously used cooling duct that was softening and sagging from the Volcano's hot heat block, so I designed a new one to be printed out of ABS filament. I tried to keep the air path as wide as possible so as not to choke the fan, as well as the small size of the air duct in the X/Y plane. There is also room for the 12mm wrench I use to hold the block when changing the nozzle. I hope that someone still uses a classic Hypercube printer in 2023 and finds my modification useful.
Print with ABS, 0.4mm nozzle/0.2mm layer height/ touching bed supports