Adjustable V-Blocks for Dry Box Filament Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
7,68 € – 9,38 € netto (bez VAT)
Dla pliku: filament_storage_base_02mm_pla_mk3s_8h31m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 8,53 € netto (środek widełek).
- Masa podana przez autora
- 107 g
- Czas druku podany przez autora
- 8,52 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
We all know wet filament sucks. Dry storage is a must. I found some great air tight containers to store open spools.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 1145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
We all know wet filament sucks. Dry storage is a must. I found some great air tight containers to store open spools. Print these files to create an adjustable v-block base and add a temperature/humidity sensor to keep an eye on your storage environment.
Print instructions
Additional Components
Snapware Airtight Plastic Food Storage Container
P.Tech's Desiccant Container for Spools
Digital Humidity and Temperature Sensors
Note: If your settings are dialed in you should be able to print the slide component as-is. The upper component is a rather long bridge but I had no problems. If you are concerned turn it 90 deg in the .3mf file.
OpenSCAD source is included if you would like to adjust anything.
Funko's Not Included