1 / 1
Adjustable V-Blocks for Dry Box Filament Storage — image 1

Adjustable V-Blocks for Dry Box Filament Storage

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€7.68 – €9.38 net (excluding VAT)

For file: filament_storage_base_02mm_pla_mk3s_8h31m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €8.53 excluding VAT (range midpoint).

Weight reported by the author
107 g
Print time reported by the author
8.52 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

We all know wet filament sucks. Dry storage is a must. I found some great air tight containers to store open spools.

Rating
0 / 5
Likes
8
Downloads
28
Makes
0
Views
1,145
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

We all know wet filament sucks. Dry storage is a must. I found some great air tight containers to store open spools. Print these files to create an adjustable v-block base and add a temperature/humidity sensor to keep an eye on your storage environment.

Print instructions

Additional Components
Snapware Airtight Plastic Food Storage Container

P.Tech's Desiccant Container for Spools

Digital Humidity and Temperature Sensors

Note: If your settings are dialed in you should be able to print the slide component as-is. The upper component is a rather long bridge but I had no problems. If you are concerned turn it 90 deg in the .3mf file.

OpenSCAD source is included if you would like to adjust anything.

Funko's Not Included

Tags