1 / 1
Sanjuks V3 Gates — zdjęcie 1

Sanjuks V3 Gates

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are smaller squircle gates for the Sanjuks V3 lever to reduce the throw.

Ocena
0 / 5
Polubienia
3
Pobrania
93
Wydruki
0
Wyświetlenia
600
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Public Domain

I wanted to use the included squircle gate for my Sanjuks V3 but I found the throw to be too long. I also didn't like how impacting the gate felt harsh/abrupt. I commissioned a local designer to design and prototype smaller gates, and then had the final files printed in TPU (90A durometer). The material has just enough give to it that it softens the impact a bit but doesn't feel weird or rubbery or anything.

The files are labeled by approximate size of the gate opening, starting at 0.80" (very similar in size the default squircle gate that the V3 comes with), and then going down from there.

I did pay out of pocket for the designing and prototyping, so if you feel like throwing a buck or two my way, you can donate at my website: pressbuttonwin.com.

Tagi