Schumacher Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
40mm fan mount I designed for my Schumacher Storm truck, it will fit in a LD1 and LD2 however I have dont have one so…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 418
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
40mm fan mount I designed for my Schumacher Storm truck, it will fit in a LD1 and LD2 however I have dont have one so cant test if it clears the shell or not!
It can also be mounted infront of the motor too, as long as the batter is far enough forward.
Theres two versions, one for a 3mm hex that will self tap and theres also one designed to accept a brass insert (the ones I have are 6mm deep) so it'll need a 6mm countersunk bolt, the self tap version can take longer bolts, 10mm sits flush.
I'd recommend printing in ABS or PETG.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
50%
Notes:
PETG recommended as the heat may cause the PLA to warp.
Category: R/C Vehicles