1 / 1
Earplug Helper
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps to put earplugs in your ears.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 458
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These were tested with Shush and Alpine MotoSafe earplugs.
They were designed to mimic the tool that comes with the Alpine MotoSafe earplugs, as I've lost that tool.
Warning: Use these at your own risk! If the print quality is subpar or if you use them incorrectly, you could hurt your ears or damage your earplugs.
Print considerations:
- Use filaments that don't tend to break/sheer when damaged.
- 0.5mm nozzle was used to print, but other nozzle sizes might work too
- Ensure your fan settings is high enough for short layer times, but make sure layer to test if layer adhesion is good.
- 100% infill was used (less might work too, but lowers your layer time)
CAD source: OnShape