Derivative modification of MIK adapter plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod secures two parts, of @VolkervmLOGICnet's original design, together with screws instead of glue.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 112
- Wydruki
- 4
- Wyświetlenia
- 1027
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modification of @VolkervmLOGICnet's excellent MIK adapter plate. The only change is to screw P3 to P1, instead of glueing them.
Materials required
In addition to the materials required for the original, the follow materials are required.
4 x M3 screw hexagon socket, thread length 20mm, head width 5.5mm
https://www.amazon.com/Socket-Screws-Metric-Machine-Threaded/dp/B0967ZK22Q
4 x M3 nuts
https://www.amazon.com/Shapenty-100PCS-Stainless-Female-Fastener/dp/B071NLDW56
Print settings
Follow the original instructions for printing. When printing P1, during the pause at 7.70mm, insert the four M3 nuts in addition to the M5 nuts.
Building instructions
Follow the original instructions for building. However, instead of glueing P3 to P1, use the four M3 screws to secure the parts together.