Derivative modification of MIK adapter plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mod secures two parts, of @VolkervmLOGICnet's original design, together with screws instead of glue.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 112
- Makes
- 4
- Views
- 1,029
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modification of @VolkervmLOGICnet's excellent MIK adapter plate. The only change is to screw P3 to P1, instead of glueing them.
Materials required
In addition to the materials required for the original, the follow materials are required.
4 x M3 screw hexagon socket, thread length 20mm, head width 5.5mm
https://www.amazon.com/Socket-Screws-Metric-Machine-Threaded/dp/B0967ZK22Q
4 x M3 nuts
https://www.amazon.com/Shapenty-100PCS-Stainless-Female-Fastener/dp/B071NLDW56
Print settings
Follow the original instructions for printing. When printing P1, during the pause at 7.70mm, insert the four M3 nuts in addition to the M5 nuts.
Building instructions
Follow the original instructions for building. However, instead of glueing P3 to P1, use the four M3 screws to secure the parts together.