Gridfinity Holders - Norton 85316 Axe & Hatchet Stone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horizontal and vertical gridfinity holders for the Norton #85316 sharpening stone for axes and hatchets.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pair of holders for the double-sided sharpening stone that Norton makes for axes and hatchets. I couldn't make up my mind whether I wanted to store this vertically or horizontally, so I made both. The bottoms of these differ slightly from standard gridfinity, in that they are designed to accept 6x3 magnets instead of 6x2, and the magnets should be a press fit rather than needing to be glued in (though you can still use glue if desired).
The upper surfaces of the holes are modified so as to force your slicer to bridge across properly, so you won't need to do any post-processing/cleanup like is needed with the original gridfinity bins. This feature is intended for use with a 0.2mm layer height, so if you deviate from that, your results may vary.
I have included the .stp files so that the holders may be customized, or even modified to hold something else entirely if needed.
Norton 85316 Stone:
https://www.amazon.com/gp/product/B000FK3YP8/