P
Printableskunaa
M6 hex screw and nut (M6x10, M6x15, M6x20, M6x25, M6x30)
nut + 0,5 size % Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
- Pobrania
- 2231
- Polubienia
- 106
- Ocena
- 5
Wyniki wyszukiwania: 6x3
288 modeli
P
PrintablesDavid D
Multiboard raw 6x3 shelve
Just a very simple shelve with a size of 6x3 of the multiboard grid (15cm x 7,5cm). How to use: You will need at least one multiboard connector for each edge of the shelve, but may use as many as you like. Connect those to the multiboard,…
- Pobrania
- 1340
- Polubienia
- 249
- Ocena
- 5
P
PrintablesValhalalala
![[REMIX] Stone Pillars for Gloomhaven with 6x3 magnet Holes for Maghex](https://media.printables.com/media/prints/191252/images/1793058_b3977f03-5ded-4370-ab38-6b3fc28d5ee3/img_2250.jpg)
[REMIX] Stone Pillars for Gloomhaven with 6x3 magnet Holes for Maghex
All I did was add holes in the bottom of Robagon 's and liquidlogic 's pillars for 6x3 magnets to use them in Xevin 's MagHex Gloomhaven Tile System (links below) but other magnetic systems will work too. It was an easy and fast edit on…
- Pobrania
- 1272
- Polubienia
- 294
- Ocena
- 4,83
P
Printablesspdwalrus
Mushroom Shelf magnet with 6x3mm magnet holes
Mushroom Shelf magnet with 6x3mm magnet holes
- Pobrania
- 1198
- Polubienia
- 299
- Ocena
- 4,75
P
PrintablesSummons
Crocodile Skink with 7 hidden 6x3mm magnets (1 pause) and 2nd pause for manual filament change
I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print... I printed in Bronze silk then Rainbow silk to get the colour. 1st pause in the print is at the top of the magnets. At the pause,…
- Pobrania
- 778
- Polubienia
- 197
- Ocena
- 4,93
P
PrintablesRork
Improved Magnetic DeWalt bit holder - 6x3mm magnets, easy insertion and removal
This is a remix of a very nice design, but updated to improve on a few things: Mounting tabs shortened by ~1mm to fit the DCD805/DCD800 (and possibly other newer model drills/drivers). Should still fit older designs. Magnets mount via…
- Pobrania
- 719
- Polubienia
- 137
- Ocena
- 4,88
P
PrintablesBen
M6/M10 PTFE Tubes connector (magnetically) PC4-M6 / PC4-M10 / 6x2mm & 6x3mm magnets
I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…
- Pobrania
- 607
- Polubienia
- 109
- Ocena
- 5
P
Printablesfractalnoise
16x32 LED Matrix Frame with Diffuser Grid
16x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector Optional socket-less version * I suggest gluing the…
- Pobrania
- 544
- Polubienia
- 68
- Ocena
- 4,67
P
PrintablesGyu.Lee
Cloud 6x3 magnet
Cloud 6x3 magnet Category: Household
- Pobrania
- 537
- Polubienia
- 98
- Ocena
- 4,86
P
PrintablesPRAXXUS
DROK LM2596-SDC LED 1-Button 66x35mm BUCK CONVERTER CASE ENCLOSURE
There are many Buck Converter enclosures posted here, and none would fit what I thought was a common 1-button LED Buck Converter (66mm x35mm), which I bought on amazon. (…
- Pobrania
- 518
- Polubienia
- 56
- Ocena
- 5
P
PrintablesShaladdin
6x3mm Magnets 3D Benchy Display Stand
I liked the original benchy stand as it was a great way to show off how my different filaments printed and looked like, but it requires you to glue the pieces together. I didn't like the idea of gluing 3d printed pieces and, once glued,…
- Pobrania
- 512
- Polubienia
- 115
- Ocena
- 5
P
PrintablesQ66
Itty Bitty Fidget - 3 positions 6x3 magnets
Remix of https://www.printables.com/model/205599-itty-bitty-fidget/files with 3 positions using 6x3 mm magnets
- Pobrania
- 372
- Polubienia
- 40
- Ocena
- 5
P
Printablesjergens
Magnetic PTFE Tube Connectors for 6x3 Disc Magnets
Based on the no offset (default) version of the original. A quick and slightly dirty modification to accommodate 6x3 magnets. I filled in the original holes and re-pocketed them to 6x3 and chamfered them as in the original. The dirty part…
- Pobrania
- 372
- Polubienia
- 82
- Ocena
- 5
P
Printables3DPHUB.NET
Bento Box 2.1 combination HEPA and activated carbon filter (6x3mm vertical pull orientation)
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
- Pobrania
- 345
- Polubienia
- 69
- Ocena
- 5
P
PrintablesDingus
Bambu Lab Y-Splitter with PC4-M6 pneumatic connector and 6x3mm magnets
Tweaked the PC4-M6 remix of this fantastic design to add 6x3mm magnets.
- Pobrania
- 345
- Polubienia
- 41
- Ocena
- 5
P
Printablesxander1
CORE One Purge/Trash Bin - Remix for 6x3mm magnets
This is a remix of CORE One Purge/Trash Bin by @nicohirsch for use with 6x3mm round magnets. There are two versions available: Holes for magnets are 3.0mm deep Holes for magnets are 3.2mm deep They exist because the first layer squish…
- Pobrania
- 341
- Polubienia
- 51
- Ocena
- 5
P
PrintablesNetpackrat
Gridfinity Basic Bins, 6x3 Magnets (press fit)
A few days ago, I decided to dip a toe into the Gridfinity swimming pool, in order to consolidate my hardware drawer bins and make better use of my space. I quickly found that Zack's original bin designs, while awesome, still had some…
- Pobrania
- 330
- Polubienia
- 41
- Ocena
- 4,5
P
PrintablesCattus Printus
Makita LXT bit holder with 6x3mm magnets for drill/drivers
A remix of Cmarlow bit holder adapted to 6x3mm magnets which were esier to get for me. Also a few changes compared to original design to improve on design: Reduced depth of holes in which bits go, magnets are strong enough to hold them in…
- Pobrania
- 316
- Polubienia
- 51
- Ocena
- 5
P
Printablesmhanny
MyBox - krabička 6x6x3 cm
Malá uzavíratelná krabička. Doporučené nastavení sliceru: tryska 0,6 mm nastavení tisku 0.30mm Quality vyhnout se přejíždění perimetrů 100% pozice švu zarovnaný nebo zezadu výplň zarovnaný přímočarý hustota výplně 15 % úhel výplně 0…
- Pobrania
- 309
- Polubienia
- 52
- Ocena
- 0
P
Printableseisie
Pegboard 36x36 cm
To expand my wife's existing SKÅDIS pegboard, I created this 3D-printed part, making full use of the Prusa XL's maximum size. It also includes separate spacers that, like the original SKÅDIS pegboard, create a 2 cm gap from the wall. Use…
- Pobrania
- 283
- Polubienia
- 93
- Ocena
- 5
P
Printableswsreith
MTG Mana Companion Cube Deck Box with 6x3 magnets
Following the basic idea from dolmdemon but only using the original models from n2o1. I remixed this design to use 6mm x 3mm round magnets instead of the 8mm x 3mm round magnets dolmdemon used. My motivation is simply that I have a lot of…
- Pobrania
- 274
- Polubienia
- 85
- Ocena
- 0
P
Printablesrsilvers
M16x30mm Nut and Bolt
M16x30mm Nut and Bolt Category: Parts
- Pobrania
- 266
- Polubienia
- 8
- Ocena
- 5
P
PrintablesTilan2000
Bambulab Magnetic Poop Shoot / Purge Bucket with 6x3 mm magnets
Remixed Bambulab Magnetic Poop Shoot for use of 6x3 mm round magnets. You need 8 of them. Just glue them in the holes after printing.
- Pobrania
- 254
- Polubienia
- 17
- Ocena
- 0
P
PrintablesPrint-Head
Gear Shifter (now with 6x3mm magnets!) | REMIX
Gear Shifter Fidget (6x3mm magnets) | REMIX (note: Modified to fit eight 6x3mm magnets instead of the original 5x3mm. And parts have to be glued together in the end.)
- Pobrania
- 237
- Polubienia
- 40
- Ocena
- 5
P
Printables_conny_k_
BaBo organizer insert scalpel + deburrer 6x3
This insert was designed for a scalpel and deburrer incl. accessories as an addition to the amazing BaBo organizer system from @Willi. Check out his site for more great inserts and modules. This scalpel + deburrer insert can be used for…
- Pobrania
- 234
- Polubienia
- 26
- Ocena
- 4,67
P
PrintablesMr Pink
Haptic slider fidget toy for 6x3 magnets
Haptic slider remixed for 6x3 magnets
- Pobrania
- 231
- Polubienia
- 39
- Ocena
- 5
P
Printablesamidgley
Bambu Poop Bucket for 6x3 magnets
The magnets I used were only 2.6mm deep and fit just proud of the print surface. I press-fit my magnets and did not need any glue.
- Pobrania
- 222
- Polubienia
- 18
- Ocena
- 5
P
Printablesrobaki
Pro-Line 6x30 12mm Hex Adapter for Robak | ProLine
The HSP 108015 axle shaft has a thread that is too short to use it with the original adapter. I reduced the thickness of the hub from 4 to 2.2mm. See drawing. That blind hole is there on purpose. Helps generating supports better. Remove…
- Pobrania
- 218
- Polubienia
- 39
- Ocena
- 0
P
PrintablesAlfie Lockrey
Magnetic Paddle Shift Ring for Logitech G29/G920/G27 (6x3 magnets))
Remix of https://www.thingiverse.com/thing:4311045 . Thank you for the original. This instead uses 4 of 6x3 magnets. Instead of 8x3. Still requires 2 of m3x20mm. Category: Hobby
- Pobrania
- 216
- Polubienia
- 28
- Ocena
- 5
P
PrintablesMrC
Buck Converter Case - 66x36 LM2596 + LCD board
This case fits a 66x36 LM2596 buck converter board with LCD. Cutouts are available for the terminal block connection, which should be plenty room for soldered wires. A voroni-cut lid allows for heat dissipation.
- Pobrania
- 214
- Polubienia
- 31
- Ocena
- 0
P
PrintablesXelinor
Prusa Core One Magnetic Corner Plugs (6x3mm Magnets)
Corner plugs for the Prusa Core One using 3 6x3mm magnets. Reccomended to print in PETG or other temperature resistant materials.
- Pobrania
- 213
- Polubienia
- 63
- Ocena
- 4,8
P
Printablesleperos
Glass Fuse Holder (5x20, 6x30)
Besides looking good in the renders (I tried!), the holder is functional and has been tested. I mention this because looks and function don't always go together. Actually, the last few versions involved adjustments of just tenths of a…
- Pobrania
- 197
- Polubienia
- 21
- Ocena
- 5
P
PrintablesJustin
LTT Screwdriver Case Bit Holder 6x3 Magnets
Added 12 6MM X 3MM Recess Holes For Magnets.
- Pobrania
- 187
- Polubienia
- 31
- Ocena
- 5
P
PrintablesDuxy
Itty Bitty Fidget (6x3 Embedded Magnets)
Remixed Itty Bitty Fidget from @3DPrinty: https://www.printables.com/model/205599-itty-bitty-fidget Printed with 0.1mm layer height, using a pause to insert the magnets before the holes are covered up.
- Pobrania
- 187
- Polubienia
- 22
- Ocena
- 5
P
PrintablesKaktus
LilyGo T-Embed CC1101 back shell with external antennas and power switch 6x3magnets,screws, without magnets
1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…
- Pobrania
- 181
- Polubienia
- 14
- Ocena
- 0
P
PrintablesDjngnear
Bambu Lab PTFE Y-Splitter with 6x3 Magnets
I liked aspects of both models so I merged them to include the built-in magnets.
- Pobrania
- 180
- Polubienia
- 20
- Ocena
- 0
P
Printablestjdesign
Magnet Box Remix 6x3 Magnets
Resized the holes of the smallest box to fit 6x3 magnets. It depends on your printer and settings, but mine barely needed a magnet to stay shut, and probably could have done with just one set. Check out the original for more box sizes!
- Pobrania
- 179
- Polubienia
- 38
- Ocena
- 5
P
Printablesfluffyeggs
AD5M LED Light Bar 6x3 Magnets
Print at .2mm layer height. The holes are sized .1mm over so that the magnets are a snug press fit.
- Pobrania
- 175
- Polubienia
- 21
- Ocena
- 5
P
Printablesmathiasl
PC4-M6 and M10 with 6x3mm magnets
Needed a version with PC4-M6 and both M6 and M10 with 6x3mm magnets instead of 5x5mm.
- Pobrania
- 166
- Polubienia
- 32
- Ocena
- 5
P
PrintablesJessica Mauerhan
Voron 2.4 Nozzle Brush with Removable Purge Bucket (6x3 Magnets)
This is a remix of the remix of the remix of the original - using the lift away nozzle holder and bucket inside the bucket - but going back to the original 6x3 magnets, which is what I had since they're used on all the other Voron stuff.…
- Pobrania
- 164
- Polubienia
- 26
- Ocena
- 5
P
Printablessalcatroppa
Bambulab P1S Poop Chute - 6x3mm magnets
Remixed from Bambulab P1S Poop Chute to support for 6x3mm magnets
- Pobrania
- 155
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLaurentN
Benchy - Fridge magnet 6x3 magnets
I only had 6x3 magnets, so I modified the following model: https://www.printables.com/fr/@Tarjei85_953672 Aimant à frigo benchy Je n'avais que des aimants en 6x3, j'ai donc modifié le modèle suivant :…
- Pobrania
- 155
- Polubienia
- 39
- Ocena
- 5
P
PrintablesBojack Horseman
Filament Dust Cleaner Filter -Enclosed Magnets 6x3
Add a pause just before the roof of the Magnet enclosure top avoid gluing in the magnets.
- Pobrania
- 152
- Polubienia
- 28
- Ocena
- 4,67
P
PrintablesRobert_Klotz
6x3 Magnet press tool.
I Printed two, one for each polarity of magnet. I used 5 perimeters, 4 top and 4 bottom with 20% gyroid infill.
- Pobrania
- 148
- Polubienia
- 32
- Ocena
- 0
P
PrintablesBrix
Magnetic switch remix for 6x3 magnets and better clearances
This is a remix of the Magnetic fidget switch by EG3Dprinting. In addition to using different magnets, I also tried to improve the clearance. I did see there was another remix of this model by bnorick, but it did not work too well for me,…
- Pobrania
- 147
- Polubienia
- 35
- Ocena
- 5
P
PrintablesJuráš Ch.
Wet palette - magnets round 6x3 mm
Magnets are attached with superglue. Be aware of diferent orientation of magnets. No supports PLA, 210°C, bed 60°C.
- Pobrania
- 135
- Polubienia
- 27
- Ocena
- 5
P
PrintablesMiki
Nozzle Torque Wrench_6X3_Magnet
This is a remix, because i did not have 9x5 magnets but 6x3. Also i changed the housing of the rotor to click in. This way it just hold in place, but can rotate as need. The 6x3 neodinium magnet hold the tool just fine. Print Settings…
- Pobrania
- 134
- Polubienia
- 12
- Ocena
- 5
P
PrintablesGyu.Lee
Cactus 6x3 magnet
Cactus 6x3 magnet Category: Household
- Pobrania
- 133
- Polubienia
- 47
- Ocena
- 0
P
PrintablesNaografix
Prusa CORE ONE purge wiper/bin with 6x3mm magnets
A purge wiper/bin designed to hold six 6x3mm magnets for Prusa CORE ONE
- Pobrania
- 132
- Polubienia
- 16
- Ocena
- 5
P
Printableslion7718
Magnetic Flat Light Switch Cover 6x3
No Supports Res: 2 Infill: 20 Print Time: 2 Hours The magnets are press fit.
- Pobrania
- 128
- Polubienia
- 24
- Ocena
- 5
P
PrintablesMcSketchys Garage
Print In Place Box With Magnetic Closure 6x3mm buttons
Remix of the original i found here. Print In Place Box With Magnetic Closure
- Pobrania
- 125
- Polubienia
- 15
- Ocena
- 4,67
P
Printablesbaldsealion
Legion Go Speaker Enhancer - 6x3 magnets version
The same model except the magnets required a 2 - 6mm x 3mm magnets, one for each side.
- Pobrania
- 121
- Polubienia
- 12
- Ocena
- 3
P
Printablesf3g4t0
derived Pico 4 Increased FOV facial interface gasket v4, by John Doe, with 6x3mm magnets holes
I just edited the very good mod by John Doe to accomodate bigger 6x3 magnets (superglue suggested)
- Pobrania
- 118
- Polubienia
- 10
- Ocena
- 5
P
PrintablesFredRod
Remix du MTG Mana Companion Cube Deck Box with 6x3 magnets de wsreith
Remix de la base des fichiers .3mf en format .STL. Pour ce qu'ils sont intéressé. Je ne suis pas l'auteur. Tout le mérite et à wsreith.
- Pobrania
- 116
- Polubienia
- 24
- Ocena
- 0
P
PrintablesRdw5e3
12mm hex "zero offset" 6x30 proline style wheel inserts for Traxxas Slash 4x4 or 2WD rear
There are cheap RC Short Course Truck wheels on Amazon that come with different hex and offset adapters but are inconveniently missing the “0 offset” 12mm hex inserts necessary for the wheels to fit under a Traxxas Slash 4x4 body. I…
- Pobrania
- 115
- Polubienia
- 21
- Ocena
- 0
P
PrintablesMrFlippant
Prusa XL filament purge catch tray for 6x3mm round magnets with room for up front nozzle cleaning brushes.
Changed length and magnet pockets size. 6x3mm round magnets are required for this version. Three for each tray.
- Pobrania
- 113
- Polubienia
- 21
- Ocena
- 5
P
Printablesalon-zil
3D printed propeller 6x6x3
3D printed propeller 6x6x3 from petg (print temp 250) work on 3s and 4s. print with 8 number of walls.
- Pobrania
- 112
- Polubienia
- 6
- Ocena
- 0
P
PrintablesaTinyShellScript
Secret Lab 2020 Titan Chair - Cloud Swap 6x3mm Magnet Remix
Remix to use common magnet size from Voron printers. How many you use is up to you. Unlikely to need to fill every hole.
- Pobrania
- 112
- Polubienia
- 8
- Ocena
- 5
P
PrintablesCattus Printus
Makita LXT double bit holder with metric 6x3mm magnets for drill/drivers
A remix of mgx bit holder adapted to 6x3mm metric magnets. Also made bit holes a bit more shallow so its easier to pull bits out. Requires 12x 6x3mm (2 for each hole) cylinder magnets. Magnet holes are tight enough that no glue is needed…
- Pobrania
- 112
- Polubienia
- 23
- Ocena
- 5
P
PrintablesHigany
Guide scope from a 6x30 finder scope: T2 adaptor
Turn your 6x30 finder scope to a compact guide scope! This adapter allows you to mount a (ZWO) camera with 12.5mm backfocus and a T2 thread to this 30mm finder scope. I tested it with my SkwWatcher 6x30 finder scopes. The scope has a very…
- Pobrania
- 110
- Polubienia
- 12
- Ocena
- 4,33
P
PrintablesTimberlineFPV
Magnetic Fidget Switch(6x3mm Magnets
Remixed the model to fit 6x3mm magnets. It might be a tight fit, and it really depends on your magnets. You might have to make the hole a little larger.
- Pobrania
- 108
- Polubienia
- 15
- Ocena
- 4,8
P
PrintablesBrian Eusebio
EDC Magnetic Tip Screwdriver with Ball Bearing (6x3mm)
This is a play on the EDC Screwdrivers that have a ball bearing at the end. Build requires a 6x3mm Magnet, Ball Bearing and M3*16 screw. Enjoy!
- Pobrania
- 106
- Polubienia
- 37
- Ocena
- 5
P
PrintablesTimmer
BambuLab X1C magnetic hepa filter 6x3mm magnets
21/07/2023; i reuploaded the lid, as some users reported a corrupted file This is a remix of @cushmail_454332 design for a Hepa filter. I did not have 5x5mm magnets on hand, only 6x3mm. It needs a total of 20 magnets. It still has the…
- Pobrania
- 104
- Polubienia
- 24
- Ocena
- 5
P
PrintablesAVieira
DK Riser for Bambu Lab X1/P1 - 6x3 magnet remix
Print the TPU gaskets and tools from the original files, there's no modifications needed for those. Print the rest from here and assemble as the original guide shows.
- Pobrania
- 104
- Polubienia
- 15
- Ocena
- 0
P
Printablescrashkg
OmniWall Panel 16x32"
I tried to find a CAD drawing or a 3D model of an OmniWall Panel so I could design stuff for the wall, there were none. I created this exact dimension model from a panel that I have. Please enjoy and let me know what you think if you use…
- Pobrania
- 104
- Polubienia
- 22
- Ocena
- 3
P
PrintablesBeaverButter
Scope Throw Lever For Leapers 2-6x32
Simple scope throw lever designed to use M3 hardware. Fits a 37mm magnification ring. Nothing special to it. Uses friction to hold tight.
- Pobrania
- 103
- Polubienia
- 6
- Ocena
- 5
P
PrintablesTomson Design
6x33cl Fanta slim can crate
Made a 6x33cl Fanta slim can crate. It's made for 5 color printing. But this setup i made it in 4 colors. It's an easy change, all colors are marked and it's the light green color on the leaf that i took the same color as the rest. Hope…
- Pobrania
- 98
- Polubienia
- 12
- Ocena
- 0
P
Printablesmrusk
Switch Cover (26x31mm)
My variation of a missile style switch cover. The cutout is 26x31mm. The cover provides a printed M2.5 thread. Mount with M2.5 screws of any sensible length. Print cover as provided in the model standing on the flat area.
- Pobrania
- 92
- Polubienia
- 22
- Ocena
- 0
P
Printablesmonksoffunk
Bambulab X1C HEPA filter holder 6x3 mod
- Removed the inner honeycomb pattern. - Only for 6x3mm magnets, but the number of magnets has been doubled. - Added a fillet. The internal and external dimensions are designed to be the same as the original, but since the fit is quite…
- Pobrania
- 89
- Polubienia
- 17
- Ocena
- 0
P
Printables紗里 落合
Articulated Slug - 6x3mm Magnets
A remix of the Articulated Slug fridge magnet by Lautrec_996, itself in turn a remix of the original articulated slug by 8ran on Thingiverse. This version utilizes two 6x3mm magnets. There are two slots, one in the head and one in the…
- Pobrania
- 88
- Polubienia
- 8
- Ocena
- 0
P
PrintablesOld Curmudgeon
WOW Stick Box Extender for 6x3 magnets
I don't have the magnets used in the original design, and didn't want to wait for a shipment. However, I do have a bag of 6x3mm left over from other projects. The magnets were almost snug, but I recommend gluing them anyway; every printer…
- Pobrania
- 87
- Polubienia
- 19
- Ocena
- 5
P
Printablesmarbledradial
Bag Clip (PRINT IN PLACE CAM) - 6x3 magnet remix
Remix of Andrei's bag clip to add a small recess for 6x3 magnets. No other modifications. I didn't see an existing remix and wanted a simple storage solution for these clips. Took inspiration from a remix of the dino clip remix and added…
- Pobrania
- 86
- Polubienia
- 15
- Ocena
- 5
P
Printablesruggibrante
Snapmaker J1 Magnetic Bowden Coupler (6x3mm magnets)
I wanted to use @3DInk_878748 's coupler but did not have the magnets in the size he chose. It allows you to use the standard PC4-01 M10 bowden couplers for 4 mm bowden tubes (to connect it to a dryer) and the original 4.4 mm reverse…
- Pobrania
- 86
- Polubienia
- 14
- Ocena
- 5
P
PrintablesGeorge Thaxton
Framework Laptop Expansion Card Holder (4+LAN) 6x3 Magnets
A simple case to store all of your framework laptop expansion cards. It fits 4 “normal” expansion cards and the lan adapter. You also need 16 6x3mm magnets for the assembly. Any 2-component adhesive should work. 10% infill is more than…
- Pobrania
- 86
- Polubienia
- 13
- Ocena
- 4,5
P
PrintablesJesus! of RandomPrint.co
6x3mm Magnet Remix - PRUSA CORE ONE Flaps
I printed mine in ABS and the magnets were a pretty tight fit. I pressed them in and I don't think they'll be falling out any time soon.
- Pobrania
- 85
- Polubienia
- 16
- Ocena
- 5
P
Printableshectare3D
Floating ring extruder visualizer (6x3 magnet version)
Original model is very cool. But I have 6 x 3 magnets only. https://youtube.com/shorts/a4ZhtiJYavo
- Pobrania
- 85
- Polubienia
- 7
- Ocena
- 5
P
PrintablesLarry Kalis
14mm 6x30 Proline wheel adaptor
The Proline Wheel Adapter is designed to fit wheels with a 14mm hex and a 6x30 bolt pattern. Print in Petg or ABS. Please leave feed back for model and i can update
- Pobrania
- 84
- Polubienia
- 10
- Ocena
- 5
P
Printablesmk
MX Ergo 40-45° Magnetic Stand (6x3mm bottom, 10x2mm top)
Changed top magnets from 9.5mm x 2.5mm -> 10mm x 2mm as they are more easily available in the EU
- Pobrania
- 83
- Polubienia
- 7
- Ocena
- 5
P
PrintablesNiklas macht Druck
Magnetic Pin Plate Ikea Skadis 6x3 & 8x3 Magnets
I designed this Magnetic Pin Plate for Ikea Skadis or something else. I uploaded diffrent Versions for 6x3 and 8x3 Magnets and with Stop during Print and not. Hope this will help you, happy printing!
- Pobrania
- 82
- Polubienia
- 9
- Ocena
- 5
P
PrintablesAlvaro.fx
6X2 MM adapter for 6X3 , 8X3 , 10X3 Magnets
I'm not smart enough to edit someone's STL file for the 300 pack of 6X2 mm magnets I bought, but I do know basic CAD. This is the lazy man fix for this issue I run into multiple times.
- Pobrania
- 82
- Polubienia
- 12
- Ocena
- 0
P
PrintablesSto
Ikea Lack Enclosure Door Knob remix for 20x6x3mm rectangle magnets with top stopper
A remix of the door knob for the Ikea Lack enclosure, adjusted for bigger magnets, smaller knob, and with a top stopper. I basically redrew the part, with the following changes: Adjusted magnet slots to 19.75*5.7*3.2mm (my magnets were…
- Pobrania
- 81
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJoeMikeMakes
D&D Spell Slot Tracker (Remix to use 6x3 magnets)
See the original source for information. The original model used 5x1 magnets, this one uses 6x3 magnets.
- Pobrania
- 81
- Polubienia
- 9
- Ocena
- 5
P
Printableschal
Aquara Multisensor 6x3 magnet mount
I know you can attach the magnet directly to the sensor but i didn't like that so i designed this mount. You need 3 6x3 magnets or a screw.
- Pobrania
- 80
- Polubienia
- 10
- Ocena
- 0
P
Printablessortwall
Gridfinity 6x3 French Cleat sortwall Grid
French Cleat trifft auf Gridfinity. Hier gibt es das Mesh für den Gridfinity 4x2 Halter von www.sortwall.de zum Download.
- Pobrania
- 79
- Polubienia
- 13
- Ocena
- 0
P
Printablesmarbledradial
Dishwasher Indicator - 6x3mm magnets
This model supports 6x3 magnets as opposed to the 5x2 on the original for added strength. Magnets will be a tight fit but should be press fit, may need light taps from a mallet to get fully set. The lettering was also raised to be closer…
- Pobrania
- 79
- Polubienia
- 9
- Ocena
- 5
P
PrintablesAjax
BentoBox 5015 6x3 Magnets Remix
Remix for "Voron spec" 6x3mm magnets i had on hand. 0.1mm Tolerance. Probably not suitable for ABS because of shrinkage, i used PETG-CF
- Pobrania
- 79
- Polubienia
- 11
- Ocena
- 0
P
PrintablesZapster
Ikea Lack Enclosure Door knob remix for 6x3mm round magnets
Remix of the IKEA Lack enclosure door knob remix that uses round 6x3mm magnets instead of the 6x2mm magnets of the original remix. For the right door knob, simply mirror the left one.
- Pobrania
- 78
- Polubienia
- 14
- Ocena
- 5
P
Printablesrevbem
6x3lever plus for Magnet Insertion Tool v2 from EmGI
This is a remix for the lever part from EmGi's excellent Magnet Insertion Tool. https://www.printables.com/model/1008467-magnet-insertion-tool-v2 The Magnet Insertion Tool is an awesome design. However I had troubles with the rubber. No…
- Pobrania
- 76
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBanzaito
CW2 runout sensor with magnet 6X3 and ECAS
What changes compared to the original: In this mod. the sphere was replaced with a 6 X 3 magnet to make the contact on the filament sensor microswitch more reliable for the new Filamentrix CW2 version and added ECAS mount. The .zip file…
- Pobrania
- 74
- Polubienia
- 11
- Ocena
- 5
P
PrintablesTruckBC
Base Plate with Print in Place 6x3mm Magnets (For Catan-Style Boardgame 2.0)
This is another alternative base-plate for the Settlers of Catan 2.0" Series. Remixed from "2.0 base plate with integrated magnets" https://www.thingiverse.com/thing:3864468 by Swantu I accidentally ordered 6x3mm magnets instead of 3x6mm…
- Pobrania
- 73
- Polubienia
- 21
- Ocena
- 0
P
PrintablesVitali
Compact Magnetic Fidget 608 bearing & 6x3mm magnets - adjustable strength
Wanted to make a compact fidget toy using 6x3mm magnets. I found the ones using 5x2mm magnets to be rather weak, and wanted to make something stronger. The outer case has spots for 3 magnets: magnets in the middle spot only…
- Pobrania
- 72
- Polubienia
- 10
- Ocena
- 0
P
Printablessicarius80
Prusa CORE One Magnetic Nozzle - 3 x 6x3 magnets
Compared to the original version, I put 3 holes to accommodate as many 6x3mm magnets. Thanks Stefan!
- Pobrania
- 72
- Polubienia
- 22
- Ocena
- 5
P
PrintablesPierre
6x3 magnets for 3D Printy Brick Block Puzzle Box
As I was building yet another version of this great puzzle for a friend and I wanted to add more "snap" to the sliders as I found the 3x3 magnets a little bit too soft for me. I did a quick remix with 6x3 magnets which are definitely…
- Pobrania
- 72
- Polubienia
- 12
- Ocena
- 4
P
PrintablesFabian
Bambulab Poop-Shoot-Magnet-6x3mm
---German Version Below--- Hello everyone, I have remixed the following model: https://makerworld.com/en/models/16983?from=search#profileId-15808 The changes are as follows, - Thicker rear panel for 6x3mm magnets, - I have added 2 extra…
- Pobrania
- 72
- Polubienia
- 1
- Ocena
- 5
P
Printablesdavidarroyo1234
LilyGo T-Embed CC1101 external antennas and switch 6x3mm magnet
Remix of the original “LILYGO T-Embed CC1101 back shell with external antennas” by dansh with 6x3 magnets
- Pobrania
- 70
- Polubienia
- 12
- Ocena
- 0
P
PrintablesLaurentN
Addams Family - Magnetic Thing 6x3 50%
To be placed on the fridge, using: 4x 6x3 mm magnets
- Pobrania
- 70
- Polubienia
- 16
- Ocena
- 0