SOVOL SV01 E3D Hemera Mount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the combo I use for the E3D Hemera extruder on the SOVOL SV01. I still have some upgrades to do : Filament…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the combo I use for the E3D Hemera extruder on the SOVOL SV01.
I still have some upgrades to do :
- Filament sensor mount
- Cable holder on the X motor mount cover.
/!\ This combo includes Tarasque1024's Hemera_5015_Fan_Mount_45deg_V4.stl https://www.thingiverse.com/thing:4039235 which works perfectly.
/!\ This combo includes my X Motor Cover from my SOVOL SV01 Savior's Kit. https://www.thingiverse.com/thing:4730352 which allows to maximize X travel to +300mm
The design try to minimize the amount of work on the genuine carriage: it mostly uses the holes already drilled into SOVOL's blue carriage. There's only one hole to drill (M3). As I tried to save the same Z-height and same Firmware configuration*, and minimize the holes to be drilled, you'll have to dismount the carriage to fix the hemera from the back of the carriage.
Firmware changes :
- X travel 300mm
- Esteps 376mm (eventually to be adjusted)
Recommended material :
PLA (for Motor and cable cover)
PETG/ASA/ABS for other parts.
Q&A
Which parts differs from the genuine SV01 ones ?
- E3D Hemera
- 5015 fan (find another fan mount if your 2040 fan is still alive)
- Some screws (BOM to come...)
2022/02/02 UPGRADE to another rugged fan duct designed by me.
Category: 3D Printing