1 / 2
MKS TFT 32 Housing (2020 or any) — zdjęcie 1
1 / 2

MKS TFT 32 Housing (2020 or any)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you're like me and you need a TFT32 holder in no time, this is the one. Features : Strong and easy design Prints…

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
258
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

If you're like me and you need a TFT32 holder in no time, this is the one.

Features :

  • Strong and easy design
  • Prints quickly <30mn
  • Revesible (fixation on top or on bottom)
  • Mounts on any suface, 2020 ready with M3 or M4 screw(s)

Requirements :

4x M3x4mm screws to hold the screen in (longer screws, use nuts as shims)

2x M3 (DIN912 or any hex socket screw)

OR

1x M4 (DIN912 or any hex socket screw)

1x M4 screw for pivot fixture

Print Settings

Printer:

Prusa I3, Tarantula, CoreXY, FLSun Delta.

Rafts:

No

Supports:

No

Resolution:

Any

Infill:

Any

Filament:

Plasti Mladec PLA

Orange


Notes:

Print hot to get a good layer bounding

Category: 3D Printer Parts

Tagi