10mn Led Strip Rail for 2020 profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(Very) fast printing led strip rail for 2020 aluminium profile (6mm groove). The led strip is mounted at a 30° angle…
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 230
- Wydruki
- 0
- Wyświetlenia
- 1680
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
(Very) fast printing led strip rail for 2020 aluminium profile (6mm groove). The led strip is mounted at a 30° angle for full area coverage from two corners (leds usualy opens at 60°).
Tested and approved.
Same principle and same printing speed as my 10mn cable clip for 2020 profile : https://www.thingiverse.com/thing:2645563
and as my loop (open or closed) cable guide : https://www.thingiverse.com/thing:2666871
Update nov.2020: 2 new models added for 8 and 10mm led strips meant to light the inside of a cabinet only. In other words, the led trip is oriented like the 120° LED beam does not light the outside.
Print Settings
Printer:
Prusa I3, Tarantula, CoreXY, FLSun Delta.
Rafts:
No
Supports:
No
Resolution:
any
Infill:
no
Notes:
Print standing up on the bed for good strength and avoid the need of supports. Scale Z axis to adjust the length. Print in vase mode. Enjoy.
Same principle and same printing speed as my 2020 Cable Clip :Category: Hobby