Husky Container Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a rack for all my Husky containers that I have parts for here....…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 1299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I created a rack for all my Husky containers that I have parts for here....
https://www.prusaprinters.org/prints/55180-husky-parts-organizer-containers
I used 1010 extrusions and 3D printed that braces and wheel mounts.
All the files and drawings are in OnShape here... https://cad.onshape.com/documents/84a3cbd592629a70fbcd4bc5/w/5b82db72ba5cdc2b8891290d/e/3b3ae984993f22e764733dd3
There is an assembly tab in the OnShape file that shows where all the pieces go.
You can make it as tall or wide as you want. You could use the 8020 brackets too for a stiffer system, but I printed to save money. Those brackets can be expensive.
Print instructions
Everything is printable without rafts or supports.