3.5" Floppy Bay SD Card Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to mount a common SD Card to IDE adapter within an open Floppy bay for retrocomputing.
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 460
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I designed this adapter to allow an SD Card adapter (that converts to IDE) to be mounted within an open floppy drive bay. This protects the board from shorts from laying around, and also allows you to access the SD card while the system is closed up. There are holes to mount the board, as well as within the case of a computer from the bottom or the side rails. They're not threaded, but are sized and positioned where it should be a non issue getting a standard screw into them.
The bottom has a large opening to simply cut down on material waste.
No obligation at all, but if you like this model, you can Buy Me a Coffee.