Fino Edge knife sharpener - Upgrades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my Leading Edge system upgrades for the Fino Edge Sharpening system Photos and video compliments of CelloDan.…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 1185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is my Leading Edge system upgrades for the Fino Edge Sharpening system
Photos and video compliments of CelloDan.
You'll need the following:
Round neodymium magnets - 12x3mm
M4 Thumb screws & / or button head screws
M4 brass threaded inserts
Steel rod, 3/16" diameter x 18" length.
Spring, with a minimum internal diameter more than 3/16", about 1.5" long.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
30%
Filament:
Doesn't matter PLA
Notes:
Use at least 3-4 or more walls / shells for rigidity.
Category: Tools