1 / 1
IKEA Vindstyrka PM 2.5 and VOC Meter Housing Case — zdjęcie 1

IKEA Vindstyrka PM 2.5 and VOC Meter Housing Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The model is a case/housing for the IKEA Vindstyrka PM 2.5 and VOC Meter. Used in Prusa enclosure to monitor VOCs.

Ocena
0 / 5
Polubienia
6
Pobrania
43
Wydruki
0
Wyświetlenia
831
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The model is a case/housing for the IKEA Vindstyrka PM 2.5 and VOC Meter. 

Use Case: Used in Prusa enclosure to monitor and trigger ventilation and Carbon/HEPA filtration system in the enclosure. Integrated into HomeAssistant to monitor and trigger ventilation and Filter system based upon PM2.5 and Temperature. I have a Nevermore Filter for the internal filtration and a ventilation Fan to control the temperature within the enclosure.

The housing supports the use of two 10x3mm magnets for mounting in an enclosure or on a wall. The case/housing and mounting solution is designed to ensure no interference to the internal fan and sensors.

Version (v3) adds two more magnets to strengthen the holding power of the Vindstyrka case within the enclosure or wall.

Please Like and Post your Makes. Much Appreciated!!

Filament: PETG, ASA, ABS

Supports: None

Infill: 25%

BOM: 10x3mm Magnets Qty: 4 (v3) Qty: 2 (v2)

Tagi