Cabinet face spacer blocks or shims
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build in cabinets required similar face offsets. Designed 1 and decided to add other common sizes.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 626
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use Case
Similar to my other model on drawer slides, when it came time to attaching my drawer faces to my built in garage cabinets I needed a repeatable spacer. For years we used a deck of playing cards with success. I originally build the 1/8th spacer and then decided to make the remaining.
These have way more uses then just draw faces so don't hesitate to download if you need a 1/16th spacer through ½ inches.
I did print these at .16 height with a .4 nozzle with success. The caliper and I were happy with the result.
Please like it if you like it
Your satisfaction is my reward. Please give this design a like if you like it, or post a picture of your make, that really makes my day!
Happy Printing!