Head Aligner for Pebble Wiper v0.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod of Kevin Mardirossian's Pebble Wiper (v2.1) to add a camera and pressure sensor. Early release, feedback welcome!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This model starts with the Pebble Wiper (v2.1) as a base, with the following modifications:
- added area for attaching Ember CXC camera (cut-out for cabling, screw holes with single-layer thickness cover to minimize supports)
- added area for Omron D2HW-C Switch (cut-outs for cabling and pegs, screw hole)
- extended PW to bring closer to build plate (currently 3mm)
Planned upgrade for next version:
- reintegrate compatibility with pebble bucket
The Linear Rail used with this part is:
LML12B Linear Rail 12mm Mini Bearing Steel Guide Rail Slide Rail+ Slide Block https://www.amazon.com/dp/B07GQKQ3H8
Threaded Rod used:
250mm Tr8x8 Lead Screw with T8 Brass Nut (Acme Thread, 2mm Pitch, 4 Starts, 8mm Lead)
https://www.amazon.com/gp/product/B0B8RKN89V/
Wiper Servo used:
DS215MG Micro Servo https://kstservos.com/products/ds215mg-v3-0-digital-metal-gear-micro-servo-3-70kg-cm-0-05sec-for-rc-glider-helicopters
Kevin Printables: https://www.printables.com/@KevinMardirossian
License note from original model: “Included files were modeled in SolidWorks 2019 with a student license, so don't even think about selling them :)”