Sofirn SP36 and SP36 Pro Flashlight Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This diffuser turns your Sofirn SP36 or SP36 Pro into a super bright lantern! Great for camping and night time activity
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 125
- Wydruki
- 2
- Wyświetlenia
- 993
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can buy one of these diffusers from me here!
If you like our models, consider giving us a 1 time donation!
Please see the assembly instructions photo! No supports required!
This is a flashlight diffuser that distributes the light radially and downward to maximize the usage of the light through the diffuser. There is some assembly required using a glue stick, aluminum foil, and a knife. Depending on your 3-D printer, you may need to scale the models a bit to get the lid to snap into the body reliably.
I print these out of PETG using a 0.4mm nozzle with 0.2mm layer height. Try as many colors as you can!
Make a glow-in-the-dark diffuser and set the flashlight to lightning/beacon mode for maximum fun!