1 / 1
TrueTrac wall mounted track holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mounted bracket to hold up to 2 TrueTrac tracks of any length.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This bracket can be screwed to the wall to get your TrueTrac tracks off of the ground and out of the way. It doesn't need supports but I printed with 2.4mm walls for strength, 15% infill with a brim.
It is installed using two screws (I used #10 screws with drywall anchors) and placed on the wall for convenient access. I placed it about a foot off the ground and it keeps the ends from getting chewed up by the not-so-even concrete it would otherwise sit on in that spot, and it is easier to reach as well.