1 / 6
Wrap/Strap roller with bearings, up to 70mm wide straps
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wrap roller i made to roll my boxing wraps nicely back together. But should work great with all straps up to 70mm wide.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 647
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
Wrap/strap roller i made using bearings to roll my boxing straps up after use. It works on all straps though.
My straps are 50mm x 0.5mm x 4000m and fit comfortably in the roller. It can take up to 70mm wide straps and 1mm thick.
Hardware:
- 2x 608-ZZ bearings
- 1x M4x20 screw
- 12x 1x5mm magnets
- 1x spacer (optional)
Everything is friction fit, but you can use a bit of super glue if you need to secure things like the magnets a bit better.
STEP file is includes if you want to remix it.
Print settings:
- I printed the housing using 0.28mm layer height, 2 perimeters and 15% infill (Bambu Studio Extra Draft preset) using BambuLab PLA.
- I printed the roller and handle using 0.20mm layer height, 6 perimeters and 25% infill (Bambu Studio Strength preset) using Spectrum Filaments PLA.
