1 / 6
Wrap/Strap roller with bearings, up to 70mm wide straps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wrap roller i made to roll my boxing wraps nicely back together. But should work great with all straps up to 70mm wide.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 38
- Makes
- 0
- Views
- 648
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution
Wrap/strap roller i made using bearings to roll my boxing straps up after use. It works on all straps though.
My straps are 50mm x 0.5mm x 4000m and fit comfortably in the roller. It can take up to 70mm wide straps and 1mm thick.
Hardware:
- 2x 608-ZZ bearings
- 1x M4x20 screw
- 12x 1x5mm magnets
- 1x spacer (optional)
Everything is friction fit, but you can use a bit of super glue if you need to secure things like the magnets a bit better.
STEP file is includes if you want to remix it.
Print settings:
- I printed the housing using 0.28mm layer height, 2 perimeters and 15% infill (Bambu Studio Extra Draft preset) using BambuLab PLA.
- I printed the roller and handle using 0.20mm layer height, 6 perimeters and 25% infill (Bambu Studio Strength preset) using Spectrum Filaments PLA.
