1 / 6
EVA 3 - Monobloc (Orbiter 2.0 Phaetus Rapido 8 mm probe BRS spannerless floating gantry) — zdjęcie 1
1 / 6

EVA 3 - Monobloc (Orbiter 2.0 Phaetus Rapido 8 mm probe BRS spannerless floating gantry)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A combination of EVA 3 Orbiter 2.0 Phaetus Rapido 8 mm probe BRS spannerless as a monobloc in order to save weight

Ocena
3 / 5
Polubienia
18
Pobrania
102
Wydruki
0
Wyświetlenia
1497
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Several parts were merged in order to save weight on these parts of the EVA 3 printhead. Hence, it looses it's modularity, but also sheds lots of weight. Not including the no longer needed screws and heat inserts the weight went down from 96 g to 58 g (depending on the material used, here PCCF). Due to the lack of material interfaces the amount of perimeters and the infill can be further reduced.

As this is a very specific use case including a floating MGN12C gantry I suspect not many want to try it out, but I am open to model it according to your needs.

My personal trials will start soon, but I printed one prototype and it looks pretty much workable.

Many thx to Florent for his spannerless model (https://store.brs-engineering.com/) and for sharing the files.

printer.cfg

[probe]
x_offset: -26.2
y_offset: -14.95

Tagi