EVA 3 - Monobloc (Orbiter 2.0 Phaetus Rapido 8 mm probe BRS spannerless floating gantry)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A combination of EVA 3 Orbiter 2.0 Phaetus Rapido 8 mm probe BRS spannerless as a monobloc in order to save weight
- Rating
- 3 / 5
- Likes
- 18
- Downloads
- 102
- Makes
- 0
- Views
- 1,497
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Several parts were merged in order to save weight on these parts of the EVA 3 printhead. Hence, it looses it's modularity, but also sheds lots of weight. Not including the no longer needed screws and heat inserts the weight went down from 96 g to 58 g (depending on the material used, here PCCF). Due to the lack of material interfaces the amount of perimeters and the infill can be further reduced.
As this is a very specific use case including a floating MGN12C gantry I suspect not many want to try it out, but I am open to model it according to your needs.
My personal trials will start soon, but I printed one prototype and it looks pretty much workable.
Many thx to Florent for his spannerless model (https://store.brs-engineering.com/) and for sharing the files.
printer.cfg
[probe]
x_offset: -26.2
y_offset: -14.95